Abstract
A relevant issue with charred exteriors is the inconsistency of the result, which makes service life predictions complicated. Contact charring enables the creation of a very evenly modified surface with accurate control of temperature and modification time, but the weathering properties are questionable. This paper evaluated the effect of the modification time relative to char layer and transition zone thickness, wood species and material density in an artificial weathering test. The results revealed higher color stability in connection to longer modification time, but also an increase in the cracked surface area. Cracking was heavily dependent on the modification regime and increased with increasing char and transition zone thicknesses. Dense spruce had the highest color stability with the most severe modification regime, but char layer thickness varied more than on other wood types. Furthermore, species-dependent cracking patterns affected the final result as the small-scale flaking experienced by birch increased the washing off of char. It is likely an even higher modification temperature with a shorter modification time is needed to produce sufficient weathering resistance suitable for exterior uses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.