Abstract
We demonstrated the possibility to inscribe long-period fiber gratings (LPFGs) in a B/Ge codoped fiber by using grating periods shorter than 150 μm. We also have arc-induced in the SMF 28 fiber an LPFG in the dispersion turning points by using a grating period of 197 μm. In previous works, the shortest periods were, respectively, of the order of 190 and 320 μm for the same fibers. To achieve such a considerable reduction in the grating periods which enables access to the higher order cladding modes (higher sensitivity), we have developed a high-voltage power supply that allows for a constant and stable electric current ranging from 10.5 up to 21 mA. Computer simulations were used to identify the cladding mode resonances for each grating inscribed in the different fibers. The fabricated LPFGs were characterized as a function of the external refractive index from 1.33 up to 1.42, and an average refractive index sensitivity of –720 nm/RIU in the 1.33–1.41 range was obtained for a 192-μm LPFG without further optimization, such as the use of etching or thin films deposition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.