Abstract
In the present study, an architectural tailoring strategy was established to tune crystalline orthorhombic molybdenum trioxide (α-MoO3) to obtain nanostructures such as nanorods, dumbbell-shaped nanorods and hierarchical nanodisks for chemiresistive gas sensors. The different types of α-MoO3 nanostructures were synthesized by adopting controlled hydrothermal reaction conditions such as reaction time and temperature. The morphological variation of nanostructures revealed changes in crystalline parameters, such as size, micro-strain, shape, surface area, and porosity. The microstructural effects and shape of the α-MoO3 nanostructures were studied to determine their influence on the analytical characteristics of a gas sensor, the sensitivity, response time, and selectivity toward NO2 analyte gas. The high surface area of α-MoO3 nanorods showed a high sensitivity of 84% at an optimal operating temperature of 110 °C, with response and recovery times at 45 and 42 s, respectively, then dumbbell-shaped nanorods is reduced with 10% lower sensitivity than nanorods at 74% at a temperature of 130 °C. Nanodisks showed the least response compared to all the synthesized structures. All nanostructures of α-MoO3 exhibited good selectivity for the NO2 analytical gas with respect to interfering gases such as CO2, NH3, ethanol, methanol, and acetone and in addition, good stability and reproducibility have been observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.