Abstract
A simple flow injection (FI) manifold with spectrophotometric detection was fabricated and tested for arbutin determination. It is based on the measurement of a red-coloured product at 514 nm formed by the complexation reaction between arbutin and 4-aminoantipyrine (4-AP) in the presence of hexacyanoferrate (III) in an alkaline medium. On injecting 300 microL standard solutions at various concentrations of arbutin into the FI system under optimum conditions, a linear calibration graph over the range of 1.0-30.0 microg mL(-1) arbutin was established. It is expressed by the regression equation y = 0.2188 +/- 0.0036x + 0.1019 +/- 0.0366 (r(2) = 0.9990, n = 5). The detection limit (3sigma) and the limit of quantitation (10sigma) were 0.04 microg mL(-1) and 0.13 microg mL(-1), respectively. The RSD of intraday and interday precisions were found to be 1.2-1.4% and 1.7-2.7%, respectively. The method was successfully applied in the determination of arbutin in four selected fruits and three commercial whitening cream extracts with the mean recoveries of the added arbutin over the range of 96.2-99.0%. No interference effects from some common excipients used in commercial whitening creams were observed. The method is simple, rapid, selective, accurate, reproducible and relatively inexpensive.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
