Abstract

This paper focused on the application of negative refractive index transmission line (NRI-TL) in dual-band unequal Wilkinson power divider (WPD) with controllable frequency and power dividing ratio. Theory and design procedure of the dual-band NRI-TL are presented in details. For demonstration, two dual-band unequal Wilkinson power dividers (WPDs) with power dividing ratio of 2:1 and operating frequencies of 0.9 and 1.8GHz are designed, fabricated and tested. The first unequal divider is based on 2-stage NRI-TLs and the second one is based on 4-stage NRI-TLs. In addition, these two types of NRI-TLs are presented to demonstrate that by increasing the number of NRI-TL unit-cells the phase response of the NRI-TLs converge to the desired characteristic. The good agreement between measured and simulated results confirmed the design concept and derived closed-form design equations. Measurements show that the first divider has 18.37% and 21.86% relative bandwidths and the second one has 33.52% and 29.12% relative bandwidths at 0.9 and 1.8GHz, respectively. The design concept of this paper can be extended to equal dual-band power dividers with arbitrary frequency ratio.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.