Abstract
AbstractPolyamidoxime (PAO)‐based fibers are recognized as one of the most promising adsorbents for industrial‐scale extraction of uranium from seawater. The spinning of PAO is usually processed in environmentally unfriendly organic solvents, which cause serious environmental and cost concerns in industrial‐scale manufacturing. In this work, an aqueous solution blow spinning (ASBS) strategy is developed for large‐scale fabrication of seawater‐stable polyamidoxime/alginate nanofibers (PAO/Alg NFs) from water‐soluble PAO precursor solution. The as‐spun PAO/Alg NFs are ready to be used for uranium adsorption after simple immersion in calcium chloride solution for crosslinking. The 3D porous architecture, flexibility, and strength of nanofibers are well maintained as the inevitable shrinkage and degeneration accompanied by traditional “alkaline‐heat activation” post treatment are completely avoided. A high adsorption capacity of 892.77 and 8.42 mg‐U g−1 NFs is achieved in uranium spiked seawater and 8 tons of nonspiked natural seawater, respectively. Taking advantage of the simplicity, low cost, and industrially scalable features, this novel ASBS approach shows great potential for industrial‐scale production of PAO‐based nanofiber adsorbent with high capacity and good mechanical strength for uranium recovery from natural seawater and industrial wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.