Abstract
PurposeThe purpose of this paper is to consider divergence of composite plate wings as well as slender wings with thin-walled cross-section of small-size airplanes. The main attention is paid to establishing of closed-form mathematical solutions for models of wings with coupling effects. Simplified solutions for calculating the divergence speed of wings with different geometry are established.Design/methodology/approachThe wings are modeled as anisotropic plate elements and thin-walled beams with closed cross-section. Two-dimensional plate-like models are applied to analysis and design problems for wings of large aspect ratio.FindingsAt first, the equations of elastic deformation for anisotropic slender, plate-like wing with the large aspect ratio are studied. The principal consideration is delivered to the coupled torsion-bending effects. The influence of anisotropic tailoring on the critical divergence speed of the wing is examined in closed form. At second, the method is extended to study the behavior of the large aspect ratio, anisotropic wing with box-like wings. The static equations of the wing with box-like profile are derived using the theory of anisotropic thin-walled beams with closed cross-section. The solutions for forward-swept wing with box-like profiles are given in analytical formulas. The formulas for critical divergence speed demonstrate the dependency upon cross-sectional shape characteristics and anisotropic properties of the wing.Research limitations/implicationsThe following simplifications are used: the simplified aerodynamic theory for the wings of large aspect ratio was applied; the static aeroelastic instability is considered (divergence); according to standard component methodology, only the component of wing was modeled, but not the whole aircraft; the simplified theories (plate-lime model for flat section or thin-walled beam of closed-section) were applied; and a single parameter that defines the rotation of a stack of single layers over the face of the wing.Practical implicationsThe simple, closed-form formulas for an estimation of critical static divergence are derived. The formulas are intended for use in designing of sport aircraft, gliders and small unmanned aircraft (drones). No complex analysis of airflow and advanced structural and aerodynamic models is necessary. The expression for chord length over the span of the wing allows for accounting a board class of wing shapes.Social implicationsThe derived theory facilitates the use of composite materials for popular small-size aircraft, and particularly, for drones and gliders.Originality/valueThe closed-form solutions for thin-walled beams in steady gas flow are delivered in closed form. The explicit formulas for slender wings with variable chord and stiffness along the wing span are derived.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Multidiscipline Modeling in Materials and Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.