Approaches for the development of occupational exposure limits for man-made mineral fibres (MMMFs)

Abstract

Occupational exposure limits (OELs) are an essential tool in the control of exposure to hazardous chemical agents, and serve to minimise the occurrence of occupational diseases associated with such exposure. The setting of OELs, together with other associated measures, forms an essential part of the European Community’s strategy on health and safety at work, upon which the legislative framework for the protection of workers from risks related to chemical agents is based. The European Commission is assisted by the Scientific Committee on Occupational Exposure Limits (SCOEL) in its work of setting OELs for hazardous chemical agents. The procedure for setting OELs requires information on the toxic mechanisms of an agent that should allow to differentiate between thresholded and non-thresholded mechanisms. In the first case, a no-observed adverse effect level (NOAEL) can be defined, which can be the basis for a derivation of an OEL. In the latter case, any exposure is correlated with a certain risk. If adequate scientific data are available, SCOEL estimates the risk associated with a series of exposure levels. This can then be used for guidance, when setting OELs at European level. Man-made mineral fibres (MMMFs) are widely used at different worksites. MMMF products can release airborne respirable fibres during their production, use and removal. According to the classification of the EU system, all MMMF fibres are considered to be irritants and are classified for carcinogenicity. EU legislation foresees the use of limit values as one of the provisions for the protection of workers from the risks related to exposure to carcinogens. In the following paper, the research requirements identified by SCOEL for the development of OELs for MMMFs will be presented.