Abstract
A temperature-insensitive strain sensor is proposed and demonstrated based on a dual-core As2Se3-polymethyl methacrylate(PMMA) taper. Longitudinal and transverse forces on the As2Se3 cores are induced by thermal expansion/contraction of the PMMA cladding due to an order of magnitude difference between the thermal expansion coefficients of As2Se3 and PMMA. At an optimal PMMA layer thickness, the wavelength shift caused by the thermally induced forces on the refractive index of the dual-core fiber cores counterbalances that caused by the thermally induced fiber length variation leading to temperature-insensitive transmission. Temperature-insensitive strain measurement over a temperature range from 30°C to 40°C is demonstrated in a dual-core As2Se3-PMMA fiber with an As2Se3 core diameter of 0.61μm and a PMMA cladding diameter of 34.4μm. Thermally induced forces in hybrid fibers open the path towards the realization of novel sensors and devices that are immune to temperature fluctuations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
