Applications of Polymer Gel for Establishing Zonal Isolations and Water Shutoff in Carbonate Formations

Abstract

SummaryIn this paper, we present the results of successful applications of polymer gels to control water production in Mexico. We discuss three case studies that used a systematic methodology to correctly diagnose near-wellbore water channeling behind the casing. The methodology uses diagnostic plots based on the historical behavior of the water/oil ratio (WOR) as a function of time. These include correlation with information from original cement bond logs (CBL's), oxygen-activated logs during production to effectively determine the origin of the water, and saturation logs to determine the water levels independent of the salinity of the water produced.In addition, we present successful applications of polymer gels to re-establish zonal isolations in the three case studies previously mentioned. We discuss gel placement and present the procedure followed in each case, evaluate a water injectivity test followed by a temperature log taken before gel placement to determine the height propagation of the water, and anticipate potential zone damage of adjacent producing intervals during gel placement. In one case, a new interval completed perforating through the gel with excellent results. Another case involved a zone abandonment with gel, in which positive pressure was tested with 35 and 70 kg/cm2 wellhead pressure at 2500 m. In all cases, the advantages of gel treatments over common cement squeezes are discussed.Finally, we present the treatment results, including the analysis of pressures recorded during gel placement and the oil and water production before and after treatment.