Applications of different nano-sized conductive materials in high energy density pouch type lithium ion batteries

Abstract

Lots of lithium ion battery (LIB) products contain lithium metal oxide LiNi5Co2Mn3O2 (LNCM) as positive electrode active material. To increase the conductivity, conductive carbon-based materials including acetylene black and carbon black become necessarily consisted in electrodes. Recently, carbon nano-tube (CNT) appears as a popular choice for conductive carbon in LIB. However, a large quantity of the conductive carbon which cannot provide capacity as the active material will decrease the energy density of batteries. The ultra-high cost of CNT comparing to conventional carbon black is also a problem. In this work, we are going to introduce ‘short length’ and ‘long length’ carbon nano-tube (S-CNT and L-CNT) into electrode in order to design a reduced-amount conductive carbon electrode. The whole experiment will be done in 1 Ah commercial type pouch LIB. By decreasing conductive carbon as well as increasing the active material in positive electrode, the energy density of LNCM-based 1Ah pouch type LIBs with only 0.16% of L-CNT inside LNCM positive electrode could reach 224 Wh/kg and 549 Wh/L, in weight and volume energy density, respectively. Also, this high energy density LIB with L-CNT reveals stable cyclability may become a valuable progress in portable devices and electric vehicle (EV) applications.