Application selection of dry film lubricant on carbon steel surface and antifriction mechanism

Abstract

PurposeCarbon steel has a high application rate in modern industry, but this type of steel has the defect of high wear. This study aims to improve the surface friction and wear performance of carbon steel under such working conditions.Design/methodology/approachIn this study, a dry film lubricant based on graphite powder was prepared by the ultrasonic dispersion method, and deposited on the surface of carbon steel specimens by the simple pressure spraying technology. At the same time, molybdenum disulfide and polytetrafluoroethylene dry film lubricants were developed by the same method, and the comparative experimental study on friction and wear was carried out in the end-face friction tester.FindingsThe results show that the deposition effect of graphite and molybdenum disulfide dry film lubricants on the surface of carbon steel is obviously better than that of polytetrafluoroethylene dry film lubricant. Compared with molybdenum disulfide and polytetrafluoroethylene dry film lubricant, graphite dry film lubricant has the best friction and wear performance on the surface of carbon steel. The working life of carbon steel specimens sprayed with graphite dry film lubricant decreases with the increase of pressure load and rotation speed. The combination of load and sliding speed will accelerate the transition of the coating to a stable direction. In addition, the micro lubricant particles formed in the wear process will form particle flow lubrication, and the appropriate addition of particle powder of the same material will also prolong the normal antifriction time of the lubricant.Originality/valueThese findings developed a dry film lubricant that can effectively improve the friction and wear properties of carbon steel surface.