Abstract

Concrete filled steel tube (CFST) stent applied in the actual project is composed of four arc CFST arches with casting. By monitoring the uniform loading deformation of CFST arches mounted on the arc middle section and the left-right shoulder section in a CFST stent, a comprehensive analysis method was proposed for the flexural propagation using ABAQUS program for the strain and the ultimate strength capacity of the outer steel pipe and the confined core concrete. The realtime monitoring and experimental results show that, the CFST specimens were damaged under the influence of triple action of pulling, pressing and bending during the process of loading increases. The support resistance capacity of the annular CFST bracing system increases with the slip amount of CFST arches and gathering of the thickness of CFST stent. After reaching the ultimate load, although it leads to concrete volume expansion and then the steel tube drum package, but annular CFST bracing system reduced the bending moment damage deformation and meet the stability requirements of practical deep underground structure., therefore, there is a certain engineering guidance significance to the non-dense pressure construction condition.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.