Application of three semi-quantitative risk assessment methods in electroplating enterprises

Abstract

Objective: To apply the semi-quantitative risk assessment model in the Technical Guidelines for Occupational Health Risk Assessment of Chemical Hazardous Factors in the Workplace to assess the occupational health risk of electroplating enterprises and explore its applicable conditions and characteristics. Methods: Three electroplating enterprises were selected as the research objects. Occupational hygiene survey and hazard factor detection were conducted on the spot. Three semi-quantitative risk assessment methods were used to assess the risk, and the evaluation results were compared. Results: The consistency between the contact index method and the comprehensive index method was strong. The weighted Kappa value was 0.946 and the P value was less than 0.001, but the consistency between the contact ratio method, the contact index method and the comprehensive index method was poor. The weighted Kappa value was 0.345 and 0.391, and the P value was 0.009 and 0.004, respectively. When the contact concentration is less than 50% OELs, the evaluation results of the contact ratio method are lower than those of the exponential method and the comprehensive exponential method. The consistency of the three methods was the highest when the contact concentration (>50%) and (<OELs). When the contact concentration >OELs, the results of the contact ratio method are higher than those of the index method and the comprehensive index method. Conclusion: Contact ratio method is suitable for occupational health risk assessment under the condition of incomplete occupational health information and for enterprise managers to identify key control points of health risk through self-assessment; Contact index method is suitable for hazard risk assessment of occupational hazards without sampling test conditions or OELs, and pre-assessment of occupational hazards of construction projects without access to analogical test data. The index method is suitable for occupational health risk assessment with available testing data and complete occupational health information.