Abstract
This study was performed to assess the validity of the R6-Rev. 3 approach to predict fracture behavior of carbon steel pipes for LWR plants. To verify the approach, a maximum load, predicted by analysis, was compared with an experimental load, obtained at JAERI. Analysis and experimentation were conducted on a STS 42 pipe (6B, sch. 80) with a circumferential through-wall crack (2θ=180°). The comparison of the results indicates that the R6-Rev. 3 approach gives conservative maximum load prediction with reasonable accuracy. In the next step, failure assessment curve (FAC) was discussed briefly, and sensitivity analysis was carried out to clarify the effects of initial crack length, pipe size, and toughness of the material on fracture load and the possibility of occurrence of net-section collapse. Although unstable fracture was predicted to occur by a mode other than net-section collapse in all analyses, fracture load was able to be evaluated by simple limit load analysis based on yield stress, so long as a proper margin was considered.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
