Abstract
Scanning electron microscopy - SEM - with energy dispersive X-ray detection - EDX -, Auger electron spectroscopy - AES - and sputtered neutral mass spectrometry - SNMS - have been used to characterize a chlorine induced corrosion of an aluminium metallisation. SEM/EDX detects the characteristic X-rays that are emitted from the first few micrometers beneath the specimens surface after inner shell ionisation by the primary electrons. AES detects the alternatively ejected Auger electrons that are generated within the topmost atomic layers of the sample. To obtain elemental concentration depth profiles, the surface layers are removed by ion sputtering. Whereas AES detects the composition of the remaining surface, SNMS measures sputtered fluxes and does not suffer from preferential sputtering. As demonstrated by the example of a chlorine induced aluminium corrosion, these analytical methods are complementary with respect to quantification, chemical information and information depth. Only by simultaneous use measuring artefacts are detectable and able to be excluded from interpretation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.