Abstract
The main objective of this investigation is to reduce the NO x emission of a stationary diesel engine with less sacrifice on smoke intensity and brake thermal efficiency (BTE). Fuel injection timing, percentage of EGR and fuel injection pressure are chosen as factors influencing the objective. Three levels were chosen in each factor and design of experiments method was employed to design the experiments. Taguchi’s L9 orthogonal array was used to conduct the engine tests with different levels of the chosen factors. Test results were analysed by analysis of variance (ANOVA) method and ANOVA table was formed for each response variable. From the ANOVA table the most influencing factor and also the significance of each factor affecting the NO x emission, smoke intensity and BTE was found out. Response graph was drawn for each response variable to determine the optimum combination of the factor levels. This optimum combination was confirmed experimentally.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Oil, Gas and Coal Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
