Abstract
AbstractCutting tool vibration analysis is the effective way to understand the machining characteristics of any material. In the present work, the effect of process parameters on cutting tool vibration is estimated using Taguchi method in turning of EN25 steel. Taguchi method uses Signal-to-Noise ratio (S/N) and Analysis of Variance (ANOVA) to determine the optimum level of process parameters and significant parameters. The results showed that cutting speed of 215 m/min, feed rate of 0.07 mm/rev and depth of cut of 0.5 mm are the optimum combination of process parameters. Cutting speed and depth of cut are the influencing parameters on cutting tool vibration. The results are experimentally verified and the results based on turning process response can be effectively improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
