Application of Six Sigma to minimize the defects in glass manufacturing industry

Abstract

PurposeThe purpose of this paper is to improve the yield of a particular model of a car windshield, as the organization faces losses due to poor performance and rejection.Design/methodology/approachThe Six Sigma DMAIC (define, measure, analyze, improve and control) methodology is used to reduce variation and defects in the process. It is a methodology based on data-driven and fact-based analysis to find out the root cause of the problem with the help of statistical analysis. A worst performing model is selected as a case study through the scoping tree. The preprocess, printing, bending and layup process defects are reduced by analyzing the potential causes and hypothesis testing.FindingsThis paper describes Six Sigma methodology in a glass manufacturing industry in India for automotive applications. The overall yield of a car windshield achieved 93.57 percent against the historical yield of 88.4 percent, resulting in saving 50 lacs per annum. Due to no rework or repairing in the glass, low first-time yield causes major losses. Process improvement through focused cross-functional team reduces variation in the process. Six Sigma improves profitability and reduces defects in the automotive glass manufacturing process.Research limitations/implicationsThis case study is applied in automotive glass manufacturing industries. For service and healthcare industries, a similar type of study can be performed. Further research on the common type of processor industry would be valuable.Practical implicationsThe case study can be used as a problem-solving methodology in manufacturing and service industries. The tools and techniques can be used in other manufacturing processes also. This paper is useful for industries, researchers and academics for understanding Six Sigma methodology and its practical implementation.Originality/valueThis case study is an attempt to solve automobile glass manufacturing problems through DMAIC approach. The paper is a real case study showing benefits of Six Sigma implementation in the manufacturing industry and saving an annual cost of 50 lacs due to rejections in the process.