Application of shallow-water acoustic tomography to measure flow direction and river discharge

Abstract

High-frequency Fluvial Acoustic Tomography System (FATS) was initially used to measure flow velocity and river discharge in a mountainous river. The results showed the high-frequency FATS, not only improves the velocity resolution, but also reduces the minimum operational range from 76m to 43m in compare with the previous type of FATS. The analysis of sound wave propagation (Ray tracing) showed the bottom topography can be the reason of multi-ray paths of sound wave in the shallow freshwater rivers. A new formula based on the continuity equation introduced to estimate the variations of the angle between the flow direction and the FATS transmission line. The flow direction was measured using two crossed FATS transmission lines of 53kHz and 30kHz. The results compared to the up-looking ADCP (Acoustic Doppler Current Profiler) deployed near the intersection of the two lines which measured the changes in flow direction. The results affirmed the efficiency of the proposed method. Finally, the river discharge was estimated by both FAT systems and compared to the Rating Curve method and moving-boat ADCP estimates. The relative error of the FATS discharge measurements was less than 10%.