Abstract
Ni-free 23Cr-1N stainless steel was examined as bipolar plates for proton exchange membrane fuel cells. Corrosion resistance of the 23Cr-1N stainless steel was better relative to 22Cr stainless steel in the simulated cathodic environments. As confirmed by X-ray photoelectron spectroscopy, the polarized 22Cr and 23Cr-1N stainless steels at pH 2.3 presented predominantly chromium oxide in the outer passive layers. At pH 4.3, the passive layer of the polarized 22Cr stainless steel changed to iron oxides dominant. Interestingly, on the other hand, the polarized 23Cr-1N stainless steel preserved chromium oxide rich outer passive layer, which provides good corrosion resistance. As a result, although the initial cell voltage was slightly lower (∼40 mV), the 23Cr-1N stainless steel bipolar plates employing cell showed better cell voltage stability up to 1000 h, compared with the 22Cr stainless steel employing cell. The operation voltage became further higher through a surface modification of the 23Cr-1N stainless steel with TiN nanoparticles. It seems that the corrosion resistive Ni-free 23Cr-1N is possible to apply for bipolar plates of proton exchange membrane fuel cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.