Application of near-surface seismic refraction tomography and multichannel analysis of surface waves for geotechnical site characterizations: A case study

Abstract

In this case study two geophysical methods based on seismic waves were employed to evaluate the geotechnical properties of the soil deposits at a site for a planned wind farm. Regional geological information shows that the study area is mainly covered by recent alluvium, which is classified as a mixture of fine sand and gravel. Twenty five seismic refraction surveys were carried out in the study area. The acquired shot gathers were processed, from which primary wave (P-wave) and shear wave (S-wave) velocities were derived. The P-wave velocities were obtained by using the Seismic Refraction Tomography method (SRT) while the S-wave velocities were extracted by utilizing the Multichannel Analysis of Surface Waves (MASW) technique, which is established based on the dispersion characteristics of Rayleigh waves. Seismic hazard at the site was evaluated according to the Iranian code using the measured S-wave velocities, and the friction angles of the soil deposits were approximated using an empirical method and by making use of Jaky's formula for earth pressure at rest, which yielded similar values. The deformation properties of the foundation soil were also estimated based on the correlations between seismic wave velocities and elastic properties of soil as well as Janbu's formula for soil modulus. The findings of this study may serve as references for economic and non-destructive geotechnical site characterizations using seismic-wave methods.