Abstract

In this paper, the possibility of applying natural coagulants obtained from common beans for the removal of colloidal particles from wastewater was investigated. Three types of wastewater were used in the experiments: stillage from bioethanol production, wastewater from sugar production, and synthetic turbid water. Natural coagulants were extracted from crushed beans using 0.5 M NaCl. Jar tests were conducted with different doses of coagulant at different pH values. After sedimentation, coagulation activity was determined by turbidity measurements. Results showed that the highest coagulation activity of the natural coagulants from common beans was achieved in stillage, at 98.8% (at pH 9 with applied dose of coagulant of 5 mL/L), while the coagulation activity in the synthetic turbid water was 90.1% (at pH 8 and a dose of 0.4 mL/L). The lowest coagulation activity was achieved in the wastewater from sugar production, at 49.8% (at pH 5.5 and dose of 0.4 mL/L).

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.