Abstract

A procedure is reported for the efficient extraction and determination of phenolics from aqueous media. The approach is based on the dispersive micro-solid phase extraction using synthesized Co3O4 nanocube-functionalized nitrogen-doped melamine foam. The adsorption and desorption conditions were optimized by response surface methodology and one-variable-at-a-time approaches. The proposed method was fully validated. Under the optimized conditions, the limits of detection were lower than 0.5 ng mL−1. Calibration curves were linear in the range from 1.0 to 250.0 ng mL−1, 0.7 to 200.0 ng mL−1, 0.2 to 250.0 ng mL−1, and 1.0 to 250.0 ng mL−1 for phenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, and pentachlorophenol, respectively. Enrichment factors and absolute recoveries from 17.5 to 20.7 and 70% to 83% were achieved. The method was successfully applied for trace monitoring of the analytes in environmental and industrial water samples with gas chromatography—flame ionization detection analysis. Satisfactory relative recoveries between 89.0% and 105.8% were obtained along with acceptable precision below 8.1%. This method is a simple, rapid, sensitive, and reliable protocol for efficient screening of the phenolics.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.