Abstract
The purpose of this study is to investigate the forming characteristics of single-pass Metal Inert Gas (MIG) welding wire for multi-layer additive manufacturing parts. Influences of arc current, arc voltage, arc distances, welding speed, wire feed speed, temperatures and heat input on layer formation were analyzed. The deposition of material by MIG process is controlled by a robot (ABB) controller for constructing walls of rectangular box shape. The samples were measured with a microhardness testing and tensile testing onto the welded bead created by the additive manufacturing technique. It was found that the mechanical properties of microhardness values are between 151.70 to 155.80 HV and the tensile strength values are between 472.71 to 491.12 MPa according to transverse and longitudinal sections of the specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.