Abstract
Low-salinity water injection (LSWI) is a recently emerged and promising technique to enhance oil recovery. In addition, it is attractive due to its relatively low-cost, environmental friendliness, and sustainability. However, the underlying mechanisms remain unclear, and very limited research has been conducted on heavy oil. To verify the feasibility of injecting a low-salinity aquifer water (LSAW) to improve the oil recovery of our target offshore heavy oil reservoir, first, a series of experiments on the core scale, including coreflooding and spontaneous imbibition experiments, were carried out. Furthermore, atomic force microscopy (AFM), contact angle, zeta potential measurement, as well as disjoining pressure calculations based on the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory were carried out to explore the underlying governing mechanism at the microscopic scale. The secondary oil recovery factors of the coreflood tests are 67.11, 70.55, and 77.18% for seawater (SW), produced water (PW), and LSAW, respectively. The additional oil recoveries by LSAW when injected in tertiary modes are 6.38% after SW injection and 5.68% after PW injection. These results indicate that compared with SW and PW which have high brine salinity, the low-salinity brine from the subsurface aquifer (LSAW) can improve oil recovery in both secondary and tertiary modes. In addition, the oil recovery factors from the spontaneous imbibition tests (27.52% by LSAW, 17.32% by PW, and 14.00% by SW) and the insignificant variation of IFTs among the three brines lead to the anticipation that the LSAW can alter the rock to a more water-wet condition compared with SW and PW, thereby giving rise to a higher oil recovery factor in the coreflooding tests. By using AFM imaging and contact angle tests, we proved that the polar asphaltene could desorb from the rock surface and consequently reduce the water contact angle substantially when subjected to low-salinity brine. Furthermore, the zeta potential and the disjoining pressure results indicate that a more repulsive force was developed between oil and the rock under the low-salinity environment, which thereby promotes asphaltene desorption and consequent wettability alteration. Our work has paved the way to apply LSWI to the offshore heavy oil sandstone reservoir.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.