Abstract
Abstract Accurately characterizing fracture network morphology is necessary for flow simulation and fracturing evaluation. The complex natural fractures and reservoir heterogeneity in unconventional reservoirs make the induced fracture network resulting from hydraulic fracturing more difficult to describe. Existing fracture propagation simulation and fracture network inversion methods cannot accurately match actual fracture network morphology. Considering the lightning breakdown similar as fracture propagation, a new efficient approach for inversion of fracture network morphology is proposed. Based on the dielectric breakdown model (DBM) for lightning breakdown simulation and similarity principle, an induced fracture propagation algorithm integrating reservoir in-situ stress, rock mechanical parameters, and stress shadow effect is proposed. The fractal index and random function are coupled to quantitatively characterize the probability distribution of induced fracture propagation path. At the same time, a matching rate function is proposed to quantitatively evaluate the fitting between fracture network morphology and the micro seismic data. Combined with automatic history matching method, the actual fracture network morphology can be inverted with the matching rate as objective function. The proposed approach is applied to fracture network simulation of mult-fractured horizontal wells of shale oil reservoir in China, and the fracture networks from inversion fit well with the micro seismic data. A simulation of 94 fractures in the 32 section of Well X2 shows that the well propagates more obvious branch fractures. The single-wing fracture network communicates approximately 200m horizontally and approximately 10m vertically. In single fracture flow simulation, it is necessary to consider the influence of complex fracture network morphology, but when simulating fluid flow for a single well or even a reservoir, only the main fracture needs to be considered. This paper proposes an induced fracture propagation algorithm that integrates reservoir in-situ stress, rock mechanical parameters, and stress shadowing effects. This algorithm greatly improves the calculation efficiency on the premise of ensuring the accuracy of induced fracture network morphology. The approach in this paper provides a theoretical basis for flow simulation of stimulated reservoirs and optimization of fracture networks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.