Abstract
Quantum dot light emitting devices (QLED) were recently investigated as the next generation of displays. Based on the type of transport materials used, the QLEDs are classified as organic, hybrid and inorganic devices. Even though the all-inorganic devices are more stable compared with OLED, the QLED's life still affected by air environment. In this paper, the low-point sealing glass frit as an encapsulation material for all inorganic quantum dot light emitting devices were fabricated by us. It was found that the laser bonding encapsulation had a better barrier performance than UV encapsulation. A lower water vapor transmission rate improved effectively from 5.31 × 10−2 gm−2day−1 of UV package to 7.46 × 10−7 gm−2day−1 of the glass frit bonding at 85 °C and a relative humidity of 85% and a longer luminance decay time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.