Abstract

The technical of realizing full-color display by monochromatic integrated 100 × 100 blue Micro-LED array exciting InP quantum dot color conversion layer is researched in this study. Using photolithography technology to prepare color film on a separate glass cover glass has the advantages of better accuracy and display resolution. The optimum thickness 12 μm of the quantum dot photoresist (QDPR) was verified and 10 μm black matrix (BM) was proposed to reduce the light crosstalk between different sub-pixels. The thickness of color filter 1 ± 0.4 μm was made successfully between the QDPR and the cover glass, which can greatly can significantly increase the display color gamut from 78.7% to 100.8% NTSC. The red and green brightness conversion efficiency reach up to 78.1% and 296.5% respectively. Representative RGB monochromatic pictures with 100% high yield were displayed successfully.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.