Abstract
The acid pickling phase, generally entrusted to HCl‐based solutions, plays a fundamental role in the production of low‐C and interstitial‐free steel coils. Very often, however, pickling operations are challenging due to the possible onset of surface defects (underpickling, overpickling, appearance of surface defects, etc.) linked to complex phenomena involving numerous factors, such as acid concentration, Fe ions in solution, temperature, time, steel type, and scale structure. Moreover, the use of inhibitors, which is essential for controlling the pickling process, represents one of the major challenges. Their dosage, although minimal, must be carefully chosen based on the type of processed coils and other plant engineering variables. The flow of hydrogen that is generated on the surface of the steel during etching causes absorption of hydrogen by the metal and its measurement is strictly linked to the phenomena occurring during scale removal. The correlation of data obtained from a Devanathan double‐cell hydrogen permeation system to results of other techniques, such as weight loss, surface analysis, metallography, and electron microscopy shows that this system can be effectively used to indirectly measure the solution aggressiveness. This experimental approach is applied to two industrial steels: a simple carbon base and an interstitial free Ti steel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
