Abstract
Cohesive zone finite element modeling is applied in the simulation of hydrogen induced stress cracking in 25%Cr duplex stainless steel. Hydrogen influence is implemented in linear and polynomial cohesive laws. Suitability of the laws in prediction of hydrogen induced stress cracking is investigated by applying models of U and V-notched tensile specimens representing a 25%Cr duplex stainless steel component submerged in sea water under cathodic protection (CP). Fracture prediction is performed by a three step procedure; elastic plastic stress analysis, stress assisted hydrogen diffusion and cohesive stress analysis. Local cohesive stress fields as well as the time to fracture initiation are investigated as a function of the shape of the traction separation laws and the element size for three levels of tensile stress. Simulated results are also compared with results from laboratory tensile tests and discussed with respect to the suitability of describing fracture initiation and fracture mechanism of the steel. The results show that the polynomial law and a mesh size of 0.5 μm gives the most accurate description of the local cohesive stress field. The simulated time to fracture is closest to laboratory test results for stresses of 0.85–0.9 times the yield strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
