Abstract
A γ-spectrometric method has been developed for the assay of uranium in crude UF4, which is used as a secondary source of input material for producing nuclear grade U-metal at natural uranium conversion plants. The method makes use of a NaI (Tl) detector coupled with a multichannel analyzer. The 1 MeV γ-ray of238U is used for calibration. A method for the fabrication of uniform γ-assay calibration standards is also suggested, based on the results of this investigation. The calibration standards were prepared by soaking the matrix in uranium solution and then drying the whole material. The amount of238U in the crude UF4 sample was directly estimated by comparing the areas under the 1 MeV γ-ray peak of known calibration standards with the corresponding areas of the samples to be measured. 100 g each of the standard and the sample were counted. 5 crude UF4 samples were analyzed by this method. The uranium contents in these samples were found to be in the range of 12.2–28.7 g. To compare the γ-ray spectrometry results with a completely independent method, chemical analysis by potentiometry of all the samples was also done. The γ-spectrometric results were found to agree within ±18% with the chemical analysis results.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Radioanalytical and Nuclear Chemistry Letters
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
