Abstract
Polyethylene Terephthalate (PET) is one of the most commonly available kinds of plastic present in the municipal solid waste and it is a non-biodegradable semi-crystalline thermoplastic polymer, studied as polyester material. This paper intends to assess impacts of using PET (regular and irradiated) as aggregate that would replace by volume of equal size (10.00-5.00mm) in asphalt blend on the engineering properties of dense graded asphaltic concrete. The volumetric and mechanical properties of the blends incorporating different percent of PET (0, 5, 10, 15 and 20) were determined. In all mixtures, 5.0% optimum bitumen content was utilized. The outcome revealed that aggregate substitution of 10% (equivalent to 2.4% by weight of total mix) with irradiated PET result in optimum Marshall Stability and flow value of 3.6mm. It also showed that mixes with irradiated PET at 100kGy radiation dose have Marshall Stability values higher than mixes with same contents of regular PET. The finding also shows that the addition of PET and utilization of gamma radiation has a critical constructive outcome on the properties of asphalt concrete mixes as the stability increases for mixes with irradiated PET when compared with mixes with regular PET (RPET).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
