Abstract
During electric arc furnace (EAF) steelmaking process, burnt lime is charged together with other slag forming materials to attain a specific basicity of the slag and to achieve purification by removing unwanted elements. Herein, fly ash (FA) containing ≈60% CaO generated from pulp/paper mills is tested to partially (15–50%) replace primary lime (PL) in pilot scale EAF trials. The obtained results show good possibilities. It is found that an increased amount of FA instead of PL reduces the required amount of FeSi (up to 3 kg t−1 of scrap) and increases the sulfur content in the final slag. As a result, the amount of required slag/ton of steel can be decreased. However, the phosphorus content in the metal is slightly increased. The replacement ratio of FA will be limited by the acceptable phosphorus level in the final steel, due to higher phosphorus content in FA from pulp and paper mills compared with that in PL. Applications of FA as slag formers can reduce the consumption of natural resources in the metallurgical processes. In addition, it can reduce the amount of wastes from pulp/paper industries sent to landfill, which is important from an environmental point of view.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
