Abstract
This study focused on the application of electrochemical noise to assess the protection level of corrosion products formed on copper during relatively short exposure time in different outdoor atmospheres. Electrochemical noise, cathodic reduction measurements and gravimetric (mass loss) analysis were applied to copper samples exposed at urban and rural/industrial areas in Cuba for 4 months. Measurements of Electrochemical current noise indicated that the poorest protective corrosion products were formed on samples exposed to atmospheres with high concentration of H2S which agreed with the corrosion rate determined by mass loss and electrochemical chronopotentiometry (cathodic reduction). The electrochemical noise methodology proposed in this work showed acceptable and reproducible results by using an electrochemical cell in which the electrolyte was formed by a distilled-water wetted cloth in contact with the compounds present on a corroded metallic surface. This methodology indicated that the corrosion protection level of the corrosion products formed on copper is related to the corrosivity of the atmosphere.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
