Application of electrical resistivity tomography (ERT) technique to detect underground cavities in a karst area of South Korea

Abstract

Recently, the electrical resistivity tomography (ERT) technique has been increasingly applied to underground cavity detection filled with groundwater and/or clay. In this study, an ERT survey was conducted to examine the spatial distribution and shape of underground cavities in a karst area in Korea. Numerical ERT modeling and inversion were carried out to select appropriate field survey parameters. Two geological structures, similar to those that exist in the field survey area, were modeled: a sinkhole model and a vein-type structure. Electrode configurations using pole–pole, pole–dipole, dipole–pole, and dipole–dipole arrays were tested with the two geologic models and compared. The numerical modeling showed that the resistivity distribution of the ERT tomogram using the pole–dipole array produced the best representation of the two models. The pole–dipole and pole–pole array configurations were applied in an ERT field survey using six boreholes. The field ERT results show that cavity areas filled with clay or groundwater appeared as low-resistivity anomalies in the limestone formation. This was particularly evident in the inclined vein-type structures attributed to fracture zones, where the field data were similar to the modeling results. Therefore, the ERT technique could be effectively used for detecting underground limestone cavities under similar geological conditions as those at our study area.