Abstract
When an insulator is placed in an electrode gap, its surface charge field distorts the geometric field, leading to a flashover at a voltage value dependent on the degree of the gap field distortion. This paper reports on studies conducted to determine the relationship between flashover voltages and electric field distribution along solid insulator surfaces. The surface electric field distribution along different insulator profiles was determined using the Finite-Difference method, and the flashover of the actual profile model measured. The obtained results show that each profile had a peak surface electric field and the higher the peak value, the lower the flashover voltage. The correlation curve for peak electric field and flashover voltage was developed using a curve fitting technique based on the Nelder-Mead simplex algorithm. >
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.