Abstract
AbstractGelatinization phenomena of amaranth starch were investigated using differential scanning calorimetry. Slight variations in onset (To) and peak (Tpl) temperatures were observed at moisture contents over 0.48 g water/g total. However, completion temperature (Tc) increased significantly. The intermediate transition temperature (Tp2) appeared at 0.61 g water/g total and below. The degree of gelatinization decreased by decreasing the moisture content. The three transition temperatures (To. Tpl and Tc) were increased and gelatinization delayed as the concentration of sucrose was enhanced. The three latter transition temperatures tended to increase as the sodium chloride was raised to 0.066 g/g total, but further increases in salt reduced significantly these temperatures. The gelatinization was delayed by increasing the salt concentration. After annealing for 12 h at 25 to 65°C, starch samples exhibited higher To and Tpl values, and narrowed gelatinization ranges. The degree of gelatinization augmented up to the annealing temperature of 55ºC and significantly decreased thereafter.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
