Application of Copper Oxide Nanofluid and Phase Change Material on the Performance of Hybrid Photovoltaic–Thermal (PVT) System

Abstract

The objective of the study is to investigate the thermal, electrical, and exergetic performance of a hybrid photovoltaic–thermal (PVT) system under the influence of copper oxide (CuO) nanofluid and phase change material (Vaseline (petroleum jelly)) as a heat storage medium. A mathematical model was developed with the help of various energy-balance equations over the layers of the hybrid system. The performance evaluation of the PVT system was performed using pure water, CuO-water nanofluid (0.2 and 0.4% weight fractions), and CuO-water nanofluid 0.4% weight fraction with Vaseline as a phase change material. The results of the overall analysis show that the performance of the PVT system is better using CuO-water nanofluid (0.4% wt. fraction) with PCM as compared to the water-cooled PVT system and CuO-water nanofluid. The results obtained from the study show indicate that the cell temperature of PVT was reduced by 4.45% using nanofluid cooling with PCM compared to a water-cooled PVT system. Moreover, the thermal, electrical, and overall efficiencies improved by 6.9%, 4.85%, and 7.24%, respectively, using 0.4% wt. fraction of CuO-water nanofluid with PCM as compared to PVT water-cooled systems. The performance of the PVT system was also investigated by changing the mass flow rate (MFR). The increase in mass flow rate (MFR) from 0.05 kg/s to 0.2 kg/s tends to enhance the electrical and overall efficiencies from 12.89% to 16.32% and 67.67% to 76.34%, respectively, using 0.4% wt. fraction of CuO-PCM as fluid.