Abstract
Based on the thermodynamic calculation, the conditions of calcium treatment to sulfur gear steel are analyzed and the samples of rolled steel are studied. Results show that Calcium treatment to melting steel after RH refining can make the sulfide inclusions and calcium aluminates bind together and form the spindle shaped low melting compound inclusions. In the meanwhile, controlling of w (O) in steel below 0.0012% before calcium treatment is more beneficial to modify the Al2O3 and sulfide by the added calcium and to form the oxide-sulfide compound inclusions only if w (AlS) in steel is adjusted to 0.015%~0.025% before continuous casting. The Ca wire should also be fed at higher temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
