Abstract
Despite the availability of new detection and monitoring methods, a complete understanding of biofouling is still lacking. Therefore, this study employed a combination of biofilm characterization protocols macro, micro, and nano (meter) scales to provide insight into the early stages of biofilm formation using cellulose acetate ultrafiltration membranes. Membranes were fouled during 53 hours of crossflow filtration using two distinct feed waters. Biofilm characterization techniques included flux decline, image analysis, and atomic force microscopy (AFM). The flux decline and image analysis (bulk biofilm surface area coverage) data could not be correlated with feed water characteristics. Using AFM, it was possible to provide feature height analyses on the nano‐ scale to verify distinct biofilm distribution and formation as function of feed water characteristics. These findings suggest that AFM‐based biofilm characterization may provide the details needed to distinguish variations in cell deposition on a single membrane surface and/or between varied feed waters. © 2012 American Institute of Chemical Engineers Environ Prog, 32: 449–457, 2013
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
