Application of Activated Charcoal in the Downstream Processing of Bacterial Olefinic Poly(3-hydroxyalkanoates)

Abstract

Medium chain length poly(hydroxyalkanoates) (mcl-PHAs) are bacterial thermoplastic elastomers with a large potential in medical applications. The present study provides a novel process to isolate and purify poly([R]-3-hydroxy-omega-undecenoate-co-3-hydroxy-omega-nonenoate-co-3-hydroxy-omega-heptenoate) (PHUE) and poly([R]-3-hydroxy-omega-undecenoate-co-3-hydroxy-omega-nonenoate-co-3-hydroxyoctanoate-co-3-hydroxy-omega-heptenoate-co-3-hydroxyhexanoate) (PHOUE) from Pseudomonas putida species. Three different types of activated charcoal were compared with regard to their capability to selectively remove impurities. The product 'Charcoal activated, powder, pure' from Merck was found to be most suitable. Using ethyl acetate as solvent, the polyesters were extracted from freeze-dried biomass at room temperature and simultaneously purified by addition of activated charcoal at the beginning of the extraction. The period of extraction was one hour and the ratio solvent to biomass was 15:1 (vol/wt). After extraction, the solids were separated by pressure filtration through a metallic lace tissue. The filtrate was again passed through the previously accumulated filter cake, followed by a second filtration through a 0.45 microm membrane to remove finest coal particles. The resulting filtrate was concentrated, thus yielding polyesters whose quality and yield depended on the quantity of activated charcoal applied. For highly pure PHUE and PHOUE with low endotoxin levels, the optimum ratio of activated charcoal to solvent for extraction (V/V) was found to be 0.5 for PHUE and 0.25 for PHOUE. The yields with regard to the raw polymers amounted to 55 wt% for PHUE and 75 wt% for PHOUE, which are acceptable for polymers that can be used for medical applications.