Application of a stress triaxiality dependent fracture criterion in the finite element analysis of unnotched Charpy specimens

Abstract

Nonlinear dynamic finite element analysis (FEA) is conducted to simulate the fracture of unnotched Charpy specimens of steel under pendulum impact loading by a dedicated, oversized and nonstandard Bulk Fracture Charpy Machine (BFCM). The impact energy needed to fracture an unnotched Charpy specimen in a BFCM test can be two orders of magnitude higher than the typical impact energy of a Charpy V-notch specimen. To predict material failure, a phenomenological, stress triaxiality dependent fracture initiation criterion and a fracture evolution law in the form of strain softening are incorporated in the constitutive relations. The BFCM impact energy results obtained from the FEA simulations compare favorably with the corresponding experimental data. In particular, the FEA predicts accurately the correlations of the BFCM impact energy with such factors as specimen geometry, impactor tup width and material type. The analyses show that a specimen’s progressive deterioration through the thickness dimension displays a range of shear to ductile fracture modes, demonstrating the necessity of applying a stress state dependent fracture initiation criterion. Modeling the strain softening behavior helps to capture the residual load carrying capability of a ductile metal or alloy beyond the onset of damage. The total impact energy can be significantly under predicted if a softening branch is not included in the stress–strain curve. This research supports a study of the puncture failure of railroad tank cars under dynamic impact loading. Applications of the presented fracture model in failure analyses of other structures are further discussed.