Abstract
A pre aeration-SBR process was adopted in the treatment of sewage wastewater in Qingdao City. The amount of wastewater was 500t/d, with COD of 500.0mg/L, BOD <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">5</sub> of 235.8 mg/L, SS of 165.8 mg/L and NH <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">+</sup> -N of 60.5 mg/L on average. The average removal rates of these indexes are 92.3%, 95.6%, 92.8% and 86.0% respectively. The effluent concentrations of these indexes are 38.3 mg/L, 10.3 mg/L, 12.0 mg/L and 8.5 mg/L, which met the grade first B requirements of Discharge standard of pollutants for municipal wastewater treatment plant (GB18918- 2002). The cost was 0.57 Yuan per ton of wastewater. This process had the advantages of low land area, low cost, high effect and simple operation and so on.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.