Abstract
Implemented Mocaf flour processing on SMEs still has a weakness in the process of drying cassava chips.The drying process is using natural sun drying. In hot conditions in full sun drying takes 2 to 3 days while in the rainy season between November and April the SMEs unproductive because of the delay time of drying, the chip mocaf grow mushrooms with the consequences of the whole production must be discarded. Thus most of the cluster chose not to produce in the rainy season.Application of forced convectionmechanical dryer is an alternative of drying technology in the fermented cassava chips drying process due have a good quality and a longer storability. Forced convectionmechanical dryer is designed with indirect heating system consisting of a heat exchanger unit, the drying chamber, shelves, blower and frames. Cassava chips drying machine capacity is 40-80 kg/batch is divided into 80 shelves. Fuel is LPG. The results of machine performance test showed an effective drying cassava chips is 3.5 hours by the end of the temperature distribution between 31.9 to 47.6 ° C and a water content of 12.1 to 12.9%, with the desired optimum water content of the cassava chips for further processing into flour mocaf is 12-13%.
Highlights
Implemented Mocaf flour processing on SMEs still has a weakness in the process of drying cassava chips
Application of forced convection mechanical dryer is an alternative of drying technology in the fermented cassava chips drying process due have a good quality and a longer storability
Forced convection mechanical dryer is designed with indirect heating system consisting of a heat exchanger unit, the drying chamber, shelves, blower and frames
Summary
Uji performansi yang dilakukan untuk mengetahui adanya kekurangan dalam desain mesin dan untuk mengetahui ketepatan teknologi yang akan diimplementasikan kepada khalayak sasaran. B) Evaluasi selama kegiatan : Evaluasi dilakukan dengan memberikan simulasi dan pelatihan kepada UKM. Evaluasi ini bertujuan untuk mengetahui hambatan-hambatan yang dihadapi oleh UKM selama penyampaian materi maupun praktek teknis dan mengetahui sampai sejauh mana adopsi teknologi dan materi pelatihan dapat diserap oleh UKM. Selanjutnya khalayak sasaran diminta untuk mencoba secara mandiri materi teknologi yang diajarkan, maka dapat diketahui sampai sejauh mana adopsi teknologi dan materi pelatihan dapat diserap oleh khalayak sasaran. C) Evaluasi akhir kegiatan : Evaluasi bertujuan untuk mengetahui keberhasilan daya serap selama pelatihan penerapan mesin pengering mekanik tipe rak dengan mengamati peningkatan pengetahuan dan keterampilan UKM sehingga dapat digunakan sebagai evaluasi dan pemantauan kegiatan di masa yang akan datang
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have