Abstract
AbstractThe vat dyeing process of specific fabrics with protective, inherently fire retardant properties that have a high content of aramid fibres in their composition, is presented. The research was performed on fabric samples that differ in raw material composition and aramid content. The samples were dyed in raw form (group 1) as well as after pretreatment with alkaline scouring (group 2). Measured limiting oxygen index (LOI) values showed that the selected fabrics meet the properties of inherently fire retardant fabrics. Dyeing was performed with Indanthren® Olive Green HB (manufactured by DyStar) vat dye, in exhaustion process, with a bath ratio of 1:30. The dye concentration was 3%, and sodium‐hydrosulphite (Na2S2O4) was used as a reducing agent. The colouristic analyses were performed based on spectrophotometric measurement and results interpretation according to CIELab system. The evaluation of primary tactile properties was performed which show an increase of smoothness and softness after scouring and dyeing. Also, wash fastness as well as light fastness tests have shown satisfactory fastness properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.