Abstract
• The efficient cooling of electronic device was designed and analyzed. • A flexible ultra-high thermal conductivity nanocomposites material used. • Model analysis, simulation and experiment proved the effectiveness. The efficient heat dissipation of electronic equipment is very important, its heat dissipation performance directly determines the life of the equipment itself. A hand-held electronic communications equipment, when used in surface temperature is exorbitant, need to heat dissipation equipment efficiently, to ensure that the use of comfort in the handheld. In accordance with this requirement, this article presents a flexible composite material based on nano-efficient cooling methods that can keep the layout, through the improvement of internal thermal path, it can achieve the effective heat dissipation. The network thermal resistance method is used to analyze the heat transfer in the equipment, and the thermal analysis of the local thermal resistance is carried out. At the same time, through the modeling of electronic equipment and the analysis of finite elements, the temperature drop of the equipment after improvement is accurately judged. Finally, the device experimental performance comparison before and after the optimization of the standby mode and working mode is verified. The results show that the optimized equipment heat source temperature can be reduced by up to 8.5°C, the surface temperature of the equipment can be reduced by about 5°C~7°C, and the final control equipment in the steady standby state of the temperature of about 39±0.5°C, to ensure the comfort of use, and also improved the service life of the equipment. The efficient thermal design of electronic equipment based on flexible nanocomposites can provide a convenient and reliable cooling solution for high-heat flow density devices.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.