Applicability of locally reacting boundary conditions to porous material layer backed by rigid wall: Wave-based numerical study in non-diffuse sound field with unevenly distributed sound absorbing surfaces

Abstract

To clarify the applicability of locally reacting boundary conditions in wave-based numerical analyses of sound fields in rooms, we numerically analyzed a non-diffuse sound field in a room with unevenly distributed sound absorbing surfaces and investigated the differences between the extended and local reactions. Each absorbing surface was a porous material layer backed by a rigid wall. Simulations were performed by the fast multipole boundary element method, a highly efficient boundary element method using the fast multipole method. At low frequencies, the extended and local reactions yielded similar reverberation decay curves because of the influence of the room. However, when the random incidence absorption coefficients were small at low frequencies or frequencies were high, the difference was greater than expected from the corresponding Eyring decay lines. We conclude at high frequencies, the locally reacting boundary conditions lead to a longer reverberation time than that expected from the absorption coefficient differences between the extended and local reactions. These differences were similar in sound-pressure-level and sound-intensity-level distributions, and in the oblique incidence absorption coefficient of the absorbing surfaces, but were increased at low frequencies.