Abstract
The applicability of an electrochemical Fenton-type process (EF-HOCl-ReFe) to the treatment of three actual wastewaters, namely wastewater from an automobile factory (automobile wastewater), metal scrap-cleansing wastewater, and municipal wastewater, is discussed in this research. The EF-HOCl-ReFe successfully removed the chemical oxygen demand (COD) from automobile wastewater pre-treated by a coagulation process without any inhibition. The apparent current efficiency reached 86%, 46% of which was ascribed to the electrochemical Fenton-type mechanism. The metal scrap-cleansing wastewater had a yellow colour and high concentrations of COD (6550 mg/L) and Cl(-) (1560 mM). The EF-HOCl-ReFe could achieve almost complete COD removal and decolourization after 48 h of treatment, although a temporary intensification of colour was observed before the decolourization. The EF-HOCl-ReFe was also effective in the removal of 1,4-dioxane from municipal wastewater pre-treated by activated sludge and coagulation processes, which were unable to remove 1,4-dioxane. The 1,4-dioxane removal efficiency after 30 min of treatment reached 68.5%. Thus, the EF-HOCl-ReFe was applicable to the treatment of these actual wastewaters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Water science and technology : a journal of the International Association on Water Pollution Research
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
