Abstract
Abstract Solid waste management (SWM) is one of the biggest concerns of society and agricultural waste is generated in vast amounts. In this study removal of Cu and Cr from wastewater using chemically modified apple peels was studied by following batch sorption experiments. Effects of metal concentration, adsorbent dose, pH, temperature and contact duration on the adsorption of Cu & Cr were investigated by using atomic adsorption spectrophotometer (AAS). SEM & EDX analysis of the adsorbents were recorded to study the morphology of the prepared adsorbents. Qmax value of apple peels is 25 for Cr and 22 for Cu, while for apple peel charcoal it is 33 for Cr and 47 for Cu, for treated apple peels Qmax is 50 for Cr and 52 for Cu adsorption. The data was processed using pseudo first, second order kinetic and intraparticle diffusion. Results depicted that the calculated adsorption capacities (qecal) were found to be close to the experimental values (qecal) by following pseudo-second-order kinetics. The applicability of the Langmuir and Freundlich adsorption isotherms was tested. Results showed that the Langmuir model is best fitted on adsorption data because regression factor R2 values are good for the Langmuir model.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: AQUA — Water Infrastructure, Ecosystems and Society
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
